IPX7 Ingress protection
waterproof
NANUK cases can be submerged in up to 1m of water for a period of 30 minutes without leakage or damage of any sort.
It's one thing to make the claim that NANUK protective cases are built tough. It's another to actually show how. The following tests were performed by an independent lab. After rigorous analysis, CERTIFICATION was awarded to all NANUK cases in each product line.
NANUK cases can be submerged in up to 1m of water for a period of 30 minutes without leakage or damage of any sort.
NANUK cases demonstrate 100% protection against dust contact. Nothing gets in.
NANUK cases are suitable for a minimum of 100 airline trips. NANUK also stands up to heavy impacts. No damage occurs when a 6kg dart falls on to the case's weakest point from a height of 0.5m.
For the drop test, weights ranging from 6.8 to 31.8kg fall on to the case from a height of no less than 48cm. Drop weight is determined by case size.
This evaluation determines NANUK's ability to withstand repetitive shocks that can occur during loose load transportation. NANUK stands up to this extreme test of vibration resistance.
Simulated rainfall lasts 20 minute per case side at a rate of 10cm/hr. During a second test, rain falls at a rate of 10cm/hr while the case is heated 18 degrees F higher than the water temperature. The second test lasts 4 hours. No water finds its way in.
The case is submerged in a basin of water 1m deep for 1 hour. For this test, the case is heated to 40 degrees F higher than the water temperature. Again, NANUK easily withstands these extreme conditions.
